CARPET PADDING WEIGHT : CARPET ODOR : CARPET ROLL CRUSH.

Category: None

CARPET PADDING WEIGHT : CARPET PADDING


CARPET PADDING WEIGHT : CARPET ODOR : CARPET ROLL CRUSH.



Carpet Padding Weight





carpet padding weight






    padding
  • Soft material such as foam or cloth used to pad or stuff something

  • Superfluous material in a book, speech, etc., introduced in order to make it reach a desired length

  • (pad) embroider: add details to

  • (pad) a number of sheets of paper fastened together along one edge

  • artifact consisting of soft or resilient material used to fill or give shape or protect or add comfort





    carpet
  • cover completely, as if with a carpet; "flowers carpeted the meadows"

  • rug: floor covering consisting of a piece of thick heavy fabric (usually with nap or pile)

  • form a carpet-like cover (over)

  • A thick or soft expanse or layer of something

  • A floor or stair covering made from thick woven fabric, typically shaped to fit a particular room

  • A large rug, typically an oriental one





    weight
  • The quality of being heavy

  • A body's relative mass or the quantity of matter contained by it, giving rise to a downward force; the heaviness of a person or thing

  • burden: weight down with a load

  • The force exerted on the mass of a body by a gravitational field

  • the vertical force exerted by a mass as a result of gravity

  • slant: present with a bias; "He biased his presentation so as to please the share holders"











Viper SRT10 ACR




Viper SRT10 ACR





The American Club Racing (ACR) model was introduced in 1999. This model had suspension and engine enhancements focused on maximizing performance in road racing and autocross environments. Horsepower was, by the use of K&N air filters and smooth intake tubes, bumped to 460 hp (370 kW) in these models, while torque increased to 500 lb·ft (678 N·m). Weight was reduced by over 50 pounds (23 kg) by stripping the interior and removing other non-essential items such as the fog lamps (replacing them with brake ducts). The new stiffer, adjustable suspension removed another 14 pounds (6.4 kg) These models, which also have engine and handling modifications, has an "ACR" badge and 20-spoke BBS wheels.

A new ACR was added to the Viper line-up after the 2008 model year. Its upgrades were more drastic than the original, including street-legal racing tires, two-piece brake rotors, adjustable suspension, and significant aerodynamic revision. No engine modifications were made, so power and torque remain at 600 hp (450 kW) and 560 lb·ft (760 N·m) as in the base car. The ACR is street-legal, and is similar to the MOPAR Viper that Dodge displayed at various auto shows. Weight was also decreased by 80 lb (36 kg) by using the "Hardcore Package", without radio, speakers, amplifier, trunk carpet, hood pad or tire-inflator. Its aerodynamic upgrades produce 1000 lbf (4.4 kN) of down-force at 150 mph (240 km/h), or roughly 10 times the downforce the base Viper SRT-10 can produce at the same speed. The interior was upgraded only by the addition of a beacon-tripped lap timer.

The Viper ACR was built alongside the standard SRT-10 at the Conner Avenue plant in Detroit. The aerodynamic components were produced by Plasan Carbon Composites and assembled to the vehicle by Prefix Corporation located in Rochester Hills, Michigan












Dodge Viper ACR




Dodge Viper ACR





A new ACR was added to the Viper line-up after the 2008 model year. Its upgrades were more drastic than the original, including street-legal racing tires, two-piece brake rotors, adjustable suspension, and significant aerodynamic revision. No engine modifications were made, so power and torque remain at 600 hp (450 kW) and 560 lb·ft (760 N·m) as in the base car. The ACR is street-legal, and is similar to the MOPAR Viper that Dodge displayed at various auto shows. Weight was also decreased by 80 lb (36 kg) by using the "Hardcore Package", without radio, speakers, amplifier, trunk carpet, hood pad or tire-inflator. Its aerodynamic upgrades produce 1000 lbf (4.4 kN) of down-force at 150 mph (240 km/h), or roughly 10 times the downforce the base Viper SRT-10 can produce at the same speed. The interior was upgraded only by the addition of a beacon-tripped lap timer.

The Viper ACR was built alongside the standard SRT-10 at the Conner Avenue plant in Detroit. The aerodynamic components were produced and assembled to the vehicle by Prefix Corporation located in Rochester Hills, Michigan.










carpet padding weight







Similar posts:

rugged smart phone

dye carpet

rug grips

kaleen rug

carpet skates commercial

rose shaped rug

self adhesive carpet



Comments:
Trackbacks:
Trackbacks URL
Comments:フォーム













Only the blog author may view the comment.


Page Top
Powered by FC2 Blog | | Template Design by スタンダード・デザインラボ